application error winlogon.exe ntdll.dll

Have you faced any issues while shutting down the computer or while starting up? Are there any error messages or error codes found? There can be many such instances where the situation may be very annoying due to the errors or the problems found on the system. The problems like the application error with winlogon.exe where the ntdll.dll may be the faulty module that is responsible for the issue. The applications may show crash issue also and sometimes no error messages or error codes are found with the same. There are different methods which can be used solving the problems and the use of the winlogon exe repair tool can be the ideal one.

The Windows XP start-up stop error with error code c000021a due to the winlogon.exe program is seen. The issue appeared after the system, booting and also rebooting. When the Safe Mode is on and the command line or the last known valid configuration is attempted in solving the issue also did not help. The system only showed the blue screen of death or the BSOD. The blue screen error is very much fatal and the issue is not at all rectified by the known methods of solving the issues.

There are instances of multiple Winlogon.exe processes running on the computer. The computer is running with the Windows Vista with 64 bits operating system and the memory utilization continues to go high. When the task manager is checked, there are about 8 to 10 winlogon.exe processes running and there are only 4 users defined on the machine. Rebooting the machine minimizes the memory utilisation temporarily, but after some days, the same problem occurs again.

The problems mentioned above can be sorted out by installing the winlogon.exe error fixing tool and that can be also helpful for solving the winlogon exe application error caused by ntdll.dll module.



Categories: dll

xp msvcrt.dll error

The xp msvcrt.dll error is one such error message which is often encountered by the Microsoft Windows operating system users. The msvcrt.dll file is an integral part of the system which is required for the efficient and smooth functioning of the computer and these files are used by some of the applications. But if the system is under the influence of Trojan or malware virus files then there is a high chance of getting msvcrt.dll file issues. These msvcrt.dll files are the dynamic link library files which are the main source where all the important information and codes are stored.

Rhonda Kennedy a client from Ontario has reported that the system32\msvcrt.dll could not be opened when the msvcrt.dll file is corrupted. The users whoever have received this type of error are looking forward to get a proper solution for them. The msvcrt.dll file fixer tool is suggested by many professionals as they are specialty designed for fixing the errors. It has been noticed that after any new installation these error messages appear on the system. For this reason it is told to keep the system updated and protected with strong anti-virus application if the system is not updated from time to time there is a high chance of getting these error messages.

Before any new installation try to make sure that the system is protected by a strong anti-virus. When the msvcr71.dll is missing from the system you may get issues like crashing of the application or high CPU usage issues. These are the common error messages which are often encountered by the clients. In order to fix the xp msvcrt dll error safely from the system it is better to use a professional tool. The msvcrt.dll fix tool is one such tool which can be used for fixing the errors safely.



Categories: dll

xp mmc print management

Print Management is something that helps you share printers when you work on a network of computers with various versions of Windows and a centralized print server. You will be able to harmonize this entire system of multiple computers and manage the printing tasks with the help of the Print Management MMC snap-in on Windows XP or any other version of Windows that you might have.However, due to issues with mmc exe file, the Print Management snap-in might crash out, or hang or develop other snags that you will not be able to solve with the help of the online tools of rectification.

For instance, there might be times, when you might find that you are not able to print documents as whenever you try so, you will start receiving messages that say the printer cannot be operated as the mmc exe parameter is incorrect or the MMC Print Management path is either missing or is corrupt. This happens more so when the users are working with Windows XP and this happens as and when there is a problem with the Print Management MMCon Windows XPand other versions of Windows.

Then again, if you have Windows 7 Pro x64 bits, you might at times not be able to run the Task Scheduler as whenever you try to run it, the application will hang as and when you click on the scheduled task and this cannot be solved with the help of the online tools that you come across free of cost. You need to turn to the quality mmc exe error rectification tools that are categorically developed to deal with these issues.

Sometimes, due to the MMC Management Control issues you might not be able connect to internet as you will not be able to turn on the Security Center Service.



Categories: dll

appcrash ntdll dll iexplore exe

If your iexplorer.exe file is getting crashed every time, then it might be happening for the damaged ntdll.dll file. The file is really corrupted by any reason. If you want to repair the appcrash issue of ntdll.dll in iexplore exe file, then you should read this article, because here you can get the solution of this problem.

Windows 10 user Emily Moore has complained, that there are ntdll.dll error for many applications in Windows 10 Professional. She has been recently getting errors in many applications with same ntdll.dll error. Some applications may not even start; other applications start, but give the ntdll.dll error later. She has done SFC/scannow several times to fix this issue, but still she is unable to repair this issue. The error is appearing again and again.

Programs are getting closed-faulting module NTDLL.DLL. Windows 7 user Julianne Gomes has posted for this problem. A couple of days ago, her programs started closing with no error. When she looks up the report in Event Viewer, then she saw, that the faulting module is ntdll.dll. This is really getting annoying, since it is hampering her ability to do her job on the computer. This is affecting programs such as Chrome, Firefox, Apache, and Spyware Doctor. The ntdll.dll file has really got damaged, and it needs to get fixed immediately with the help of a powerful software system.

Antonio Placidi is getting stop-c0000221 unknown hard error\Systemroot\System32\ntdll.dll problem. He has a Dell Vostro 1500 running Windows XP Home edition. During the Windows booting time, the system crashes and displays the above mentioned error. He replaced and upgraded the hard drive and ram modules with Dell components and attempted to run the system disk to boot. The same result appeared with the blue screen and stop-0000221 error with unknown hard problem. So new hardware and system disk boot give same result. He is searching for a quick solution to resolve this issue.

If there is appcrash ntdll dll problem in iexplore exe, then you need to go for the application of ntdll.dll fixer of VSKSoft to save your machine.



Categories: dll

appcrash powershell exe

The users of the Windows operating system have a good knowledge about the different types of error messages. These errors mainly appear when there is a Trojan or malware virus attack occurs. It is told to keep the system updated and protected with a strong anti-virus program. The appcrash powershell exe issues are the most common error message which is encountered by some of the clients. These issues arise when the powershell.exe file gets corrupted and make the system inactive. In order to get back the normal functional mode of the system, it is important to remove these error messages from the system.

In the customer support forum you will definitely notice that the users have experienced various issues. Task Scheduler failed to start. Additional Data: Error Value: 2147943726. What does this mean? Questions like this are often found posted on the forum and the users who have posted them are desperately looking for the proper solution to fix them. There are online repairing tools available in the market but most of them can only provide a temporary solution. For this reason, it is told to select a professional tool for fixing the errors.

Erin Lehane is a client from Fitzgibbon who has reported an issue regarding window powershell.exe updating task. These errors are mainly found appearing when the powershell.exe file gets corrupted. Sometimes an unclean registry is also considered to be a cause of getting these error messages on your system.

The appcrash powershell.exe issues are also encountered by some of the clients from different regions. The powershell.exe file fixer tool is the best tool which is often recommended by some clients. The users who have applied this tool are satisfied with the solution and that is why they have recommended some of the users about those errors.



Categories: dll

appcrash explorer shell32.dll

Shell32 and notepad both have stopped working in the Windows 8 operating system based Acer computer from last few days ago. It has been reported by the Pennsylvania based Rayan Brown that something is not working properly in the machine and system unable to work even after trying a lot. He has also informed that something infected take place and that’s why Microsoft Office application suit unable to open. While he has forced to open the specific suit, then appcrash issue occurred and Windows Explorer become unable to run kind of situation take place and it has been suspected that, the major reason behind that is infected shell32.dll file.

Error Shell32.dll USER32.dll causing Windows Explorer to crash on Windows 7 64 bit operating system based Dell machine. Johana Henry from New York has reported that something is not working well in the machine and that’s why such kind of appcrash rather explorer file crashing condition take place and dll file shell32 unable to work accurately. He has informed that due to such specific problem, he become unable to take any kind of update in the machine and also unable to access any single folder of the Microsoft Word application. Those faults have also slow down the speed of processor day by day and it is taking almost half an hour to take proper start up even after trying a lot.

That’s why need to find out some accurate solution as soon as possible for the betterment of the computer. So, download and run shell32.dll file fixer and get rid of all those above mentioned issues even after trying a lot. Just users need to spend a few amount of money and purchase it from some well-known and renowned website. That’s why just use it and keep computers problem and hassle free.



Categories: dll

blue screen chkdsk Windows 7

In Windows 7 chkdsk exe blue screen of death had started to appear. The computer will crash on BSOD when the PC will be affected by corrupted exe file. The files come with operating system and it is located at the C drive or in the system sub folder. The PC crashed randomly in normal mode to boot. The error was probably from the registry. User can try to use the chkdsk.exe fixer in the PC in order to fix the blue screen of death by chkdsk .exe in Windows 7 and in Windows 8, Windows 8.1 and in Windows 10 and solved these errors mentioned here.

In Windows XP operating system, there was an error that appeared to check bad sectors. The error message was Unable to run Chkdsk, and cannot run Disk Defrag Error, ‘Disk defragmenter has detected that Chkdsk is scheduled to run on the volume OS(C). Please run Chkdsk / f. The defragment process was, first double click on My Computer, then on C properties, Tools, Check Now, Auto Fix System Errors and to scan for bad sectors. The message did not stop appearing to restart or to boot into the safe mode.

To reboot the computer, an error occurred. The problem appeared to install software, uninstall software or to clean up registry using free registry cleaner tool. To run the chkdsk command in Command Prompt, the same error message appeared again. The error message was Chdsk unspecified error under Windows 7. When the error message appeared on the screen, it immediately turned black and has stopped responding. To use the command in the CMD, the message was Volume is Dirty CHKDSK checks on every boot. The volume is a Data drive. The file system structure on the disk is corrupt and unusable.



Categories: dll

Blue screen tcpip.sys

A Windows 7 computer had developed theses blue screen errors – for those of you who aren’t sure what these are – they are error message that happen when there are some hardware or system resources problems. The causes for them are very different and almost always require you to reinstall Windows all over again after you’ve fixed all hardware issues first.

This system here could still be used normally but this client was always being redirected to new temporary ID or user account. Under this new automated one, she could not access any of her data, information or programs and nothing would be saved once she had logged out of it.

The event logs had described these errors with an Event ID 55 and its source in the NTFS file. It had advised on using the chkdsk utility to scan the entire Hard Disk Volume 2 as it was unusable or corrupt.

Oddly enough, the Check Disk function would not work through the recovery options menu as these blue screen tcpip.sys errors had occurred and that the drive was in use too. This would also not run when the computer was being started too – it was eventually initiated through the command prompt but here this scan had its own error. It had said that an error was detected for one file 8566 on the index $I30 and that the ChkDsk could not continue in the read only mode.

There are two things causing the blue screen with tcpip sys error and can be fixed with a tcpip.sys file fixer- one where the user profile isn’t loaded correctly and the other started by the Bytemobile Optimization Client product. She had reinstalled this software first and then when to fix the new temporary profile that was created as the current profile was corrupted.



Categories: dll

Appcrash d3d11.dll

Application crash or appcrash errors are often encountered by many of us. We often install many third party programs on our computers. These programs have their own set of files. The most important one is the application file with .exe extension. They are the executable files. They help to run or execute programs on Windows. But these files require certain Windows files to work on a Windows platform. The Windows files are called dynamic link library files. They have .dll extensions. If the dll files get corrupted then Windows will keep failing to use them. Errors will start happening.

We often use Internet Explorer as the default browser on Windows 7. We might be using Internet Explorer 10. But it is possible to update it to Internet Explorer 11. Sometimes we start getting Internet Explorer has stopped working message after installing Internet Explorer 11. The message also states that some problem forced the program to stop working. Windows then closes the program. Issues like this are recorded by Windows Event Viewer. We can type ‘event’ in the Windows search bar and Event Viewer will show up as an option. On opening it we will see that iexplore.exe appcrash is the error. D3d11.dll is the fault module name. The error indicates that Windows is failing to run the iexplore executable file because d3d11 is corrupted.

There is a way to fix this without needing to buy a new PC or reinstall Windows. The threat and the infected file can be removed using a d3d11 malware removal tool. Then a new copy of the file can be downloaded and installed using a d3d11 fix tool.

The same tool can help with other appcrash issues caused by d3d11 .dll. For example, it may be seen that Blizzard games are crashing due to Blizzard launcher.exe appcrasherror. The d3d11 file is responsible. Replacing the file is enough to fix this.



Categories: dll

Appcrash kernelbase.dll exception code e0434f4d

Appcrash on kernelbase.dll with exception code e0434f4d can start to appear in a computer. This dll file error can happen on any OS version on any application. Dll files have to be fixed on time otherwise it can cause serious issues. DLL files come preinstalled with the operating system. The error can happen on any OS version of Windows including Windows 7, Windows 8, Windows 8.1 and in Windows 10. The dll file should be fixed promptly otherwise it can cause severe issues. For fixing Appcrash on kernelbase dll with exception code e0434f4d, download and install Kernelbase fix tool. It had fixed these two errors mentioned here.

KERNELBASE.DLL error on Windows server 2012 had started to appear on the screen. The computer crashed on blue screen of death or BSOD. After installing updates errors had started to appear. This Server 2012 r2 was fully updated still it was causing issues in the PC. Installing .net 4.6 with all updates did not help for fixing the error. System File Checker said there is no error in the PC. Antivirus scan also came clean and this was a completely new OS installation.

Dell XPS 15 9550 laptop has started to show issues of different types. It has 16 GB RAM and 2 GB Nvidia 960m. After installing updates for Windows 10 version 1511, all errors had started to appear on the screen. Artlantis Studio 6 activation had failed with the error. Demo of the software ran smoothly but to the licensed version or Artlantis License Manager to activate license, it crashed before starting. There were two error log, both have KERNELBASE.dll, version 10.0.10586.0 and .NET runtime error in common. Safe mode booting, clean update installation or reinstalling graohic card and .net framework did not help.



Categories: dll